Latest Headlines
- ECSO Deputy Involved In Chain Reaction Crash On Highway 29
- Updated: Two Stab Each Other Outside Atmore Tractor Supply Company Store In Ongoing Dispute
- Two Injured In Two Wrecks That Slowed Highway 29 Traffic Tuesday Afternoon
- County To Continue Discussions On Latest Offer For OLF-8 Property
- How Cute! Beulah Middle Welcomes Three New Kids
- Tate AJROTC Teams Place In Top 10 At State Competition
- Preview: Northview At Tate Tonight In The Baseball Battle For North Escambia
- Northview Lady Chiefs Shut Out J.U. Blacksher
- Murderer Serving Life Sentence Assaulted Correctional Officer At Century Prison, FDC Says
- U.S. Marshals Track Down Wanted Atmore Fugitive
Federal Report Released In Deadly Airgas Explosion (With Photos)
April 21, 2017
The U.S. Chemical Safety Board (CSB) released its final report into the August 28, 2016, nitrous oxide explosion at the Airgas manufacturing facility in Cantonment. The blast killed the only Airgas employee working at the facility that day and heavily damaged the plant, halting its manufacturing of nitrous oxide indefinitely.
The CSB investigation found that federal regulations require some chemical facilities that manufacture hazardous substances to have process safety management systems in place to protect their workforce and the public. The CSB discovered, however, that a majority of these specialized rules are not required for nitrous oxide facilities.
Chairperson Vanessa Allen Sutherland said, “Nitrous oxide is a hazardous substance – facilities should have good safety management systems to mitigate the risks that exist. Safety management systems standards are critical to identify, evaluate, and control process safety hazards. This tragedy in Cantonment should not be repeated.”
Earlier this year, the Occupational Safety and Health Administration (OSHA) fined the company $12,000 saying it failed to provide a safe workplace.
(article continues below photo)
In its final report, the CSB notes that the contributing causes of the explosion all stemmed from the lack of an effective process safety management system. For example:
- Even though heat from the pump was a known hazard, Airgas did not evaluate safer design options that could have eliminated the need for the pump altogether;
- The company did not perform a management of change review or hazard analysis before installing the pump to identify and control hazards; and
- Safeguards installed by the company, including the safety interlock to automatically shut down the pump, and flame arrestors were likely ineffective, and failed to prevent the incident.
The Airgas Cantonment facility is one of four manufacturing plants in the United States producing nitrous oxide for industrial facilities, hospitals, and universities. The Airgas process includes pumping liquid nitrous oxide from storage tanks into trailer trucks or shipping containers, which deliver the product nationwide.
(article continues below photo)
On the day of the explosion, the Airgas operator likely began the transfer process. Under normal operating conditions, nitrous oxide is stable and can be safely handled; however, under certain conditions it can decompose explosively. CSB investigators found that a pump used to transfer nitrous oxide into a trailer heated the gas above its safe operating limit and triggered a violent decomposition reaction. The reaction migrated from the pump into the trailer causing the explosion. The explosion scattered large metal fragments for hundreds of feet, damaged the facility, and killed the Airgas operator, 32-year old Jesse Folmar. Investigators below Folmar was standing in the approximate location indicated by the yellow star in the photo above.
CSB Lead Investigator Dan Tillema said, “We looked at other possible causes such as static electricity, but the available evidence, it appears that the bypass of the safety interlock on the pump during startup likely allowed the pump to overheat and trigger a decomposition reaction.”
As a result of its investigation, the CSB issued safety recommendations to Airgas, the Compressed Gas Association, and to two nitrous oxide pump manufacturers. The recommendations include the development and implementation of a safety management system standard for nitrous oxide manufacturing as well as the distribution of increased warnings about nitrous oxide decomposition hazards.
Chairperson Sutherland said, “Our recommendations reiterate the importance of safety management systems as critical to control hazards during the manufacturing, transferring, and shipping of nitrous oxide. Strong safety management systems are good business practices, which also save lives.”
The CSB’s 146-page report was dedicated to Folmer.
The CSB is an independent, non-regulatory federal agency charged with investigating serious chemical incidents. The agency’s board members are appointed by the president and confirmed by the Senate. CSB investigations look into all aspects of chemical accidents, including physical causes such as equipment failure as well as inadequacies in regulations, industry standards, and safety management systems.
The Board does not issue citations or fines but does make safety recommendations to plants, industry organizations, labor groups, and regulatory agencies such as OSHA and EPA.
Courtesy photos for NorthEscambia.com, click to enlarge.
Comments
2 Responses to “Federal Report Released In Deadly Airgas Explosion (With Photos)”
Please note:
There are those who expect and demand reports like this ten seconds after a disaster, not realizing it takes time to study all the records and look at all the evidence to accurately determined all the facts — and that’s at BEST.
David for truth
If I’m understanding this, it’s more of a company wide design flaw/ safety policy problem rather than negilience/ safety violation on the local level.